HELP REPLY Command: REPLY This command is used to reply to the last mail message which was read. The subject of the resulting message will be the same as that of the previously-read message with an RE: preceding it. You may also specify a message number to reply to, so that reading it first is unnecessary. Syntax: REply REPly msg-# Command: REPLY/DELETE This variation of the REPLY command does the same function but also deletes the messages to which you are replying. Syntax: REPly/Delete G7EXO de GB7... 10MAY 2050Z >

HELP SEND Command: SEND This command is used to send a mail message to another station. You will be prompted for the station being sent to, the subject, and the message. The mail message may be terminated with either a ctrl/Z or the text /EXIT. If you wish to cancel the mail message, send a ctrl/Y to the system The /PRIVATE qualifier sends a private message; the /NOPRIVATE qualifier sends a public message. The /RR qualifier requests a return receipt, so that when the addressee reads the mail, a confirmation is returned to the sender. Syntax: Send Send/Private Send/NOPrivate Send/RR G7EXO de GB7... 10-MAY 2052Z >

HELP SET Command: SET The SET command is used to set user-specific options on the PacketCluster. Syntax: SEt/qualifier

Additional help available for the following SET qualifiers: /ALIAS /ANSI /BEEP /DX_ANNOUNCEMENTS /FILTER /HERE /HOME_NODE / LOCATION /LOGIN_ANNOUNCEMENTS /LOGOUT ANNOUNCEMENBTS /MAIL_ANNOUNCEMENTS /NAME /NEED /NOALIAS /NOANSI /NOBEEP /NODX_ANNOUNCEMENTS /NOFILTER /NOHERE /NOLOGIN_ANNOUNCEMENTS /NOMAIL_ANNOUNCEMENTS /NONEED /NOPRIVILEGE /NOTALK /NOWWV_ANNOUNCEMENTS / PAGE /PRIVILEGE /QTH /TALK /WWV ANNOUNCEMENTS G7EXO de GB7... 10-MAY 2053Z >- HELP SHOW Command: SHOW The SHOW command is used to display certain information on the PacketCluster. Syntax: SHow/qualifier

 DXC LUS

Additional help available for the following SHOW qualifiers: /ANNOUNCE ARCHIVE /BULLADDR BULLETINS /CLUSTER /COMMANDS /CONFIGURATION DISTRO /DX /EXCLUDE /FILES FILTER /FORWARD /HEADING /INACTIVITY LOCATION

LOG /NOTICE /SUN WWV ... HELP TALK Command: TALK Syntax:

/LOGON MESSAGES /MUF /PREFIX STATE

/TIME

/USERS

WX

The TALK command is used to which are connected to the types of TALK: Talk Mode to Talk function.

NEED

/STATION

/VERSION

talk to various stations PacketCluster. There are two another station, and a one-line

Talk call Talk to the specified station. This provides one-way talk capability to that station. If that station wants to communicate back, they must also do a T command. A ctrl/Z will only terminate your side of the talk. Talk call msg This allows you to send a one-line message to the specified station. It does NOT put you into talk mode and hence, no ctrl/Z is needed to terminate it. Note: This type of Talk is also available from within Conference mode by prefacing the T with an asterisk (*T). *** Note *** The following commands are available from within Talk Mode: DX, SHOW/DX, ANNOUNCE, TALK (one line talk to another station), SHOW/USERS, and SHOW/WWV by prefacing them with an asterisk (*).

Command: TALK/TIMESTAMP This command instructs PacketCluster to timestamp the one-line message you are sending to the specified station. Syntax: Talk/Timestamp call message G7EXO de GB7... 10-MAY 2057Z >

HELP TYPE

Command: TYPE

Syntax:

HELP UPDATE Command: UPDATE

Syntax Example

This command is used to display a file which has been uploaded to the PacketCluster. The files which are available may be shown by doing a SHOW/FILES, SHOW/BULLETIN, or SHOW/ARCHIVE. The qualifier must be the same as that on the SHOW command. If no qualifier is specified, it is assumed the file resides in the /BULLETIN area. TYpe/area filename TYpe/area/nn filename (displays on nn lines of file) TYpe/USERCMD (displays personal command file) 10-MAY 2102Z >

This command is used to update a:database which has been setup by the sysop. You will be asked for a key value, followed by the text which should be associated with this key value. Databases which have been defined on your system may be displayed with the SHOWCOMMANDS command. UPDATE/database UPDATE/QSLNEW

 1 L1(

lAOKM Enter text. Terminate with ctrl/Z or /EXIT ... QSL lAOKM via IOIJ /EXIT

Command: UPDATE/APPEND The APPEND qualifier instructs PacketCluster to add your new text to the current entry which exists in the database. Syntax: UPDATE/database/APPEND

HELP UPLOAD Command: UPLOAD This command is used to upload files to the PacketCluster. UPLOAD without a qualifier,0r with the /FILES qualifier will upload the file to the files area and will be shown on subsequent SHOW/FILES commands. The /BULLETIN qualifier will upload the file to the bulletin area and will be shown on subsequent SHOW/BULLETIN commands. To upload a personal command procedure, use the /USERCMD qualifier. Syntax: UPload filename UPload/Bulletin filename UPload/Files filename UPload/Usercmd G7EXO de GB7... 10-MAY 2119Z >

HELP WWV Command: WWV This command allows you to announce and log WWV propagation ; information. To display previously-logged information, use SHOW/WWV. In Conference or Talk Mode, use *WWV. Syntax: Wwv SF=xxx,A=xx,K=xx,forecast G7EXO de GB7...10-MAY 2122Z > HELP WX Command: WX This command allows you to announce weather conditions to the local cluster users. If a cluster-wide announcement is desired, use WX/FULL. Syntax: WX information WX/FULL information G7EXO de GB7...10-MAY 21242>>/FONT>
HOME