DON'T use ANNounce/FULL unless the information is perishable (i.e. time-sensitive)
and really needs to go to ALL users immediately.
DO ask yourself before you do an ANNouncelFULL whether the info wouldn't be
better in a message to ALL where a lot more people than those logged on at the
time will see it.
DO try to keep ANNouncements and mail to DX related matters. If you want to send
out general ,mail, please use the BBS network.
DO send replies/comments to an ANNounce back to the originator using Talk, not
ANNounce.
DO try the W6GO QSL database before putting out a Mail message to find a QSL
manager.
DO update QSLNEW when you find a new QSL manager - It is then to the rest of
the users of the Cluster.
DON'T rise to the bait if someone is obviously abusing the Cluster facilities.
DO hit "carriage return" or "enter" after 68 characters or so when you are sending
mail on the Cluster.
DON'T fill your mail messages with lines of spaces - they all take air time to transmit
- the object of the exercise is to convey information, not to make a message look
pretty!
DO use your nearest PacketCluster. Don't DX through the node network, as this will
probably slow the inter-Cluster links down considerably.
DO use Level 4 connects to your Cluster; If its callsign appears in the node list on
your local access node, use C (Cluster callsign). Don't try to tailor a route through
the network by connecting to intermediate nodes if it isn't necessary.
DO pick a Cluster and stay with it and don't flit from one-to-another. Any mail for
you will follow you around from Cluster-to-Cluster and this congests the network
unnecessarily.
DO delete your mail when you've read it.
DO use the UPLoad/Usercmd utility to tailor your own configuration, and especially
the filters.
DON'T complain about VHF spots if you are an NF DXer, or HF spots if you are a
VHF DXer. Use the SET/Filter command inside a USERCMD file. to tailor what you
get to your own tastes.
DO - if you have any problems, please send your Sysop a mail message g
up. Please don't use the ANN/FULL facility to ask for advice which might well be in
the User Manual.
DO consider the effects of your actions on other users of the network - remember
there is a rush hour and if possible, avoid heavy usage at that time.
DO SH/CLuster in preference to SH/Con whenever possible. Then, if you see a
whole load of clusters connected you can just do a SH/Con GB7xxx for whichever
Cluster you want, rather than getting the whole lot.
DO send BYE or Q to disconnect rather than a hard disconnect which leaves the
network cluttered with packets that have nowhere to go.
DO ENJOY the facilities and if you have any suggestions for us that you think will
improve the system, please let us know.-
DON'T use the weather (WX) command except for warnings of severe weather that
could damage amateur installations.